Saginaw Stove Works

Information may not be reliable

Out door wood furnaces. Out-door wood Boilers.
Estimate for a Stainless Steel Outdoor Wood Stove, that will heat 5,000 sq. ft. Placed 40 ft from the building;

This includes: SS Wood Stove that heats 5,000 sq. ft., Brass bushings, Insulated pipe for 40 ft. Domestic water kit, Pump & flange, Low E pad, Slab, Air scoop & bleeder, and a Heat exchanger (approximate, depending on size, either for a hot air furnace or a hot water boiler).
Does not include pipe and fittings in the house or at the stove, (approximately $200), Elect wire (approximately $50), delivery, tax, nor labor.

Saginaw Stove Works, Since 1987

Open 7 days a week, 9AM to 5PM. Call first. Accept phone calls: 9AM. until 10 PM.

Home Owners, Home Builders, Do-It-Yourselfers, Contractors

We will design your complete system and answer any questions.
We sell the parts to do-it-yourself or we can install your system.
Or, you can start the job and we will finish it and get it going.

Get what you want, Do it yourself and save, Free Estimates.

FLOOR HEAT SYSTEMS: Every component you need for heated floors.
Both Concrete and Wood. Old or new construction. Lower and upper floors.

Manifolds ($10 per port for ½”), Pumps, Controls, Zone Valves, Mixing Valves

Free design, instructions, and estimates.

1/2" non barrier Pex $.27 per ft. (250 ft. roll $67.50, 300 ft. roll $81.00) Made in the U.S.A. 30 year warranty, Cannot be used with cast iron.

1/2" barrier Pex $.40 per foot (250 ft. roll $100.00, 300 ft. roll $120.00) Made in the U.S.A. 30 year warranty, Can be used with cast iron.

1/2" Pex/Al/Pex The best for floor heat. $.50 per foot (250 ft. roll $125.00, 300 ft. roll $150.00)
Made in Canada 30 year warranty, can be used with cast iron. Aluminum spreads the heat best. Compression fittings, no special tools needed. Saves fuel, the best on the market.
Other Pex size tube available: 5/8", 3/4", 1"

Munchkin

L.P or Nat. Gas, 92% Efficient, Wall Vent with PVC pipe. Stainless Steel Heat Exchanger. Modulating firing, Compact and Efficient. Shippable.

MC120 44 to 120 KBTU $2,700
Wall Mount T-50 16 to 46 KBTU $2,350
T-80 17 to 74 KBTU $2,550

Floor Model 80-M 25 to 74 KBTU $2,450
140-M 43 to 129 KBTU $3450

Slant/Fin Boilers Gas: L.P. or Natural Gas

Roof Vent Sentry Wall Vent Victory

Model BTU Price Model BTU Price

S-34 25,000 $1,350 V-30 23,000 $1,550

S-60 44,000 $1,450 V-60 43,000 $1,650

OIL BOILERS Slant/Fin XL-2000

XL-20 68,000 $1,800

XL-30 90,000 $2,000

ELECTRIC BOILERS Argo, Slant/Fin, & Thermolec

ARGO THERMOLEC Full Modulation
Cast Iron Heat Exchanger Stainless Steel Heat Exchanger

9 KW 31,000 N/A $1,050 $1,200

15 KW 51,000 N/A $1,250 $1,425
16 KW 54,000 $1,200 N/A N/A
18 KW 61,000 N/A $1,350 $1,550

23 KW 78,000 N/A $1,575 $1,725
24 KW 82,000 $1,325 N/A N/A
27 KW 92,000 N/A $1,775 $1,975

30 KW 102,000 N/A $2,100 $2,325
35 KW 119,000 N/A $2,200 $2,550

Stainless Steel by HEATMOR
Manufactured in Minnesota since 1984.

Model Heats Price while they last

100 CSS 3,000 sq. ft Please call
200 CSS 5,000 sq. ft. Please call
400 DCSS 10,000 sq. ft. Please call
600 CSS 15,000 sq. ft. Please call
800 CSS 20,000 sq. ft. Please call

Heatmor Add On Options (add to the price of the stove)
Shaker Grate – 100CSS Please call Used Oil Burner Please call
Shaker Grate – 200 CSS Please call Oil Port & Housing Only Please call

Shaker Grate – 400DCSS Please call

Domestic Coil Please call
Corn Burner Please call Domestic Hole & Plate only Please call

We carry every component of an Outdoor Wood Furnace. Every question will be answered.

SAUNA STOVES Wood or Electric by Kuuma
Manufactured in Minnesota by Lamppa Mfg. since 1935

ELECTRIC SAUNA STOVES 220 volt, 6,000 watts, requires #8 wire, 40 amp. breaker, 1” clearance.
100% Stainless Steel Shippable
High Wide Depth
Wall Mount Electric $949 19 17 14
Floor Model Electric $949 19 20 23

Options: 1 Hour Timer $80 6 Hour Timer $90

WOOD SAUNA STOVES bricks included

Small $748 32 14 18 64 sq. ft. or 500 cu. ft.
Medium $801 32 18 18 144 sq. ft. or 1,000 cu. ft.
Large $854 32 18 23 256 sq. ft. or 1,500 cu. ft.

Add On Options (add to the price of the stove)
Stainless Steel Water Tank & Cover Small & Medium $250 12 gal.

Ash Pan set up with Grate $130 Tidy Ash Removal
Single Heat Shield $54 close to combustible wall
Double Heat Shield $107 side & back, one piece
8” Throat Extension $94 feed through wall
12” Throat Extension $104 feed through wall
Copper Water Coil $200 hot water coil
Replacement Bricks $2 ea. stove comes with bricks

WOOD FURNACES Add-on indoor wood hot air furnaces, comes with fan.

Kuuma I add on $1,625.00 Heats 3,200 sq. ft.
Vaporfire 200 add on $3850.00 Heats 3,200 sq. ft. Smokeless
Vaporfire 100 add on $4350.00 Heats 4,000 sq. ft. Smokeless

Add on Options (add to the price of the stove)
Fan Filter Box $50 Cold air return filter
Copper water coil $150 Domestic water heating coil

By Environmentally Safe Products Inc.
Under concrete roll-out insulator and vapor barrier all in one. Replaces Styrofoam and plastic. Easy to use, extremely durable, decreases slab response time, reduces labor time. Closed cell foam with Aluminum stops heat from going into the ground, and reflects heat up through the floor. Convenient, lightweight rolls. The easiest and best way to insulate under a slab. Roll it down into drop footings and up the other side.

Roll = 4 ft. wide and 63 ft. long. (252 sq. ft.) $126

SAGINAW STOVE WORKS
Located 15 minutes from Duluth Minnesota and Superior Wisconsin.
(Just off Hwy #2 – 2 ½ miles west of Hwy #33)
(Hwy #2 goes through Proctor Mn, and Hwy #33 goes through Cloquet Mn.)
4712 Aune Rd. Saginaw, MN. 55779
Duluth Mn. Area: 729-8390 Toll-free 888-729-8390
E-mail Questions to: Keith@saginawstoveworks.com

All prices subject to change without notice.

We strive to keep all content up to date. Specifications, products and prices are subject to change beyond our control. Please call or visit for current prices.

These are keywords to help you find the Saginaw Stove Works pages on the internet, you can ignore them. stove, boiler, floor heat, in floor, slab, slab heat, wood, gas, oil, electric, kitek, radiant, ipex, warm, northwest manufacturing, heatmor, furnace, outdoor, empyre, hot water, insul-seal, pvc, insulated, royall, slant/fin, slantfin, esp, environmentally safe products, low-e, slab-shield, kuuma, lamppa, Saginaw, Minnesota
Saginawstoveworks guybert.com pace63